COTTER PINS FOR MST STYLE SHAFT
| Size | Shaft Size | S.S. Part No. | Brass Part No. |
| 1/8 x 3/4 | 3/4 | 225 18CPS34 | 225 18CPB34 |
| 1/8 x 1 | 7/8--- 1 1/8 | 225 18CPS1 | 225 18CPB1 |
| 5/32 x 1-1/4 | 1 1/4 | 225 532CPS114 | 225 532CPB114 |
| 5/32 x 1-1/2 | 1 3/8 | 225 532CPS112 | 225 532CPB112 |
| 3/16 x 1-3/4 | 1 1/2 | 225 316CPS134 | 225 316CPB134 |
| 3/16 x 2 | 1 3/4 | 225 316CPS2 | 225 316CPB2 |
| 1/4 x 2-1/4 | 2---2 1/4 | 225 14CPS214 | 225 14CPB214 |
| 1/4 x 3 | 2 1/2---3 | 225 14CPS3 | 225 14CPB3 |
| 3/4 | 3---3 1/4 | 225 34KS | 225 34KB |
Length of cotter pin is measured from underneath head to extreme end of
short shank.
COTTER PINS FOR CHRIS CRAFT STYLE SHAFT
| Size | Shaft Size | S.S. Part No. | Brass Part No. |
| 3/32 x 2 | 3/4 | 225 332CPS2 | 225 332CPB2 |
| 1/8 x 2-1/2 | 7/8---1 1/8 | 225 18CPS212 | 225 18CPB212 |
| 5/32 x 2-1/2 | 1 1/4---1 3/8 | 225 532CPS212 | 225 532CPB212 |
| 3/16 x 2-1/2 | 1 1/2--- 1 3/4 | 225 316CPS212 | 225 316CPB212 |
| 1/4 x 3 | 2---3 | 225 14CPS3 | 225 14CPB3 |
All extruded key stock
is pre-radiused for proper fit in propeller end of shaft. Thus
there is no contact in fillet areas; such contact produces early shaft failure.
KEYSTOCK
| Size | Shaft Size | S.S. Part No. | Brass Part No. |
| 3/16 | 3/4 | 225 316KS | 225 316KB |
| 1/4 | 7/8---1 1/8 | 225 14KS | 225 14KB |
| 5/16 | 1 1/4---1 3/8 | 225 516KS | 225 516KB |
| 3/8 | 1 1/2 | 225 38KS | 225 38KB |
| 7/16 | 1 3/4 | 225 716KS | 225 716KB |
| 1/2 | 2 | 225 12KS | 225 12KB |
| 9/16 | 2 1/4 | 225 916KS | 225 916KB |
| 5/8 | 2 1/2---2 3/4 | 225 58KS | 225 58KB |
E-Mail Henry H. Smith
Place an Order
Back to Index
03/06/07