Volvo-Penta Aquamatic
200, 250, 270, 275, 280, 290, SP
Motor HP |
Gear Ratio |
Approximate Boat Length |
|||
| Thru 17’ | 18’ - 21’ | 22’ - 25’ | Houseboats, Barges | ||
| 110-145 HP | 1.35:1 | 14 x 15 | 14 x 15 | ||
| 1.62:1 | 14 x 17 | 14 x 15 | 14 x 17 | ||
| 2.15:1 | 14 x 19 | 14 x 17 | 15 x 13 | ||
| 150-185 HP | 1.35:1 | 14 x 17 | 14 x 17 | 15 x 13 | |
| 1.61:1 | 14 x 21 | 14 x 21 | 15 x 17 | 15 x 15 | |
| 1.89:1 | 14 x 19 | 14 x 19 | 15 x 15 | 15 x 13 | |
| 190-225 HP | 1.35:1 | 14 x 21 | 15 x 19 | 15 x 17 | |
| 1.61:1 | 14 x 23 | 16 x 17 | 16 x 17 | 16 x 13 | |
| 230-260 HP | 1.61:1 | 14 x 23 | 14 x 23 | 14 x 23 | |
| 290 HP | 1.61:1 | 14 x 23 | 14 x 23 | 14 x 23 | |
| LONG HUB PROPELLERS (Non-Thru Hub Exhaust & 17 Tooth Spline) | ||||
| PartNo.(LH) |
PartNo.(RH) |
Material | Size |
Blade |
| 101 082001 1¤ | 101 082002 1¤ | Aluminum | 14 x 17 | 3 |
| 101 082003 1¤ | 101 082004 1¤ | Aluminum | 14 x 19 | 3 |
| 101 082009 1¤ | 101 082010 1¤ | Aluminum | 14 x 21 | 3 |
| 101 082011 1¤ | 101 082012 1¤ | Aluminum | 15 x 17 | 3 |
| 101 082013¤ | 101 082014¤ | Aluminum | 15 x 19 | 3 |
| 101 082015¤ | 101 082016¤ | Aluminum | 15 x 21 | 3 |
| 101 082089 1 | N/A | Aluminum | 16 x 13 | 3 |
| 101 082091 1 | 101 082090 1 | Aluminum | 16 x 15 | 3 |
| 101 082093 1 | 101 082092 1 | Aluminum | 16 x 17 | 3 |
| 101 083001¤ | 101 083002¤ | S.S.V - S.S | 15-1/4 X 17 | 3 |
| 101 083003¤ | 101 083004¤ | S.S.V - S.S | 15 X 19 | 3 |
| 101 083005¤ | 101 083006¤ | S.S.V - S.S | 14-1/2 X 21 | 3 |
| STANDARD HUB PROPELLERS (Non-Thru Hub Exhaust & 17 Tooth Spline) | ||||
| PartNo.(LH) | PartNo.(RH) | Material |
Size | Blade |
| 101 082025 1 | 101 082026 1 | Aluminum | 14 x 15 | 3 |
| 101 082027 1 | 101 082028 1 | Aluminum | 14 x 17 | 3 |
| 101 082031 1 | 101 082032 1 | Aluminum | 14 x 19 | 3 |
| 101 082033 | 101 082034 | Aluminum | 14 x 21 | 3 |
| 101 082087 1 | N/A | Aluminum | 15 x 13 | 3 |
| 101 082059 1 | 101 082060 1 | Aluminum | 15 x 15 | 3 |
| 101 082029 1 | 101 082030 1 | Aluminum | 15 x 17 | 3 |
| 101 082021 | 101 082022 | Aluminum | 15 x 19 | 3 |
| 101 082023 | N/A | Aluminum | 15 x 21 | 3 |
|
VOLVO PENTA 100-110: EATON MODEL B: (Two Tooth/Pin Drive) |
||||
| Part No. (LH) | Material | Size | Blade | |
|
110-150 HP |
101 082045 | Aluminum | 14 L 12 | 3 |
| 101 082057 | Aluminum | 14 L 10 | 3 | |
Note:
Bushings for above propellers suggested for maximum 240 HP UNLESS marked with a
¤
SSV Series: 1) Designed for boats with power to weight ratios of 12:1 &
below.
2) Boats must have power trim.
3) Anti-cavitation plate height 1" above boat bottom.
4) Blades cambered must run in ventilated condition.
5) Use 2" less pitch if current aluminum prop is cupped, 3" less if uncupped.
Parts 101 083005 & 101 083006 will not fit a 270 outdrive.
Long hub
propellers are for use with model 275, 280, & 290 outdrives & late
production 270 outdrives which have drilled propeller shaft.
Standard hub propeller installations are from outdrive serial #PZ2877179,
& are NOT for use with V-6 diesel engines.
Standard Hub Propeller installations
require:
Long Hub
Propeller Hardware:
A) Thrust Ring #107 23160
A) Thrust Ring
#107 23150
B) Plastic Washer #107 23070
B) Plastic Washer #107 23070
C) Spacer Washer #107 23050
C) Propeller Cone #107
23040
D) Prop Cone #107 23040
D) Screw #107 23240
E) Screw #107 23240
F) Prop Lock Tab #107
23060
E-Mail
Henry H. Smith
Place an Order
Back to Index
03/06/07