Marine Security Locks

ANTI-THEFT SECURITY SYSTEMS

THE PROP COP
SPECIFICALLY DESIGNED TO PROTECT HIGH PERFORMANCE PROPELLERS FROM THIEVES, BUT CAN BE USED ON STANDARD PROPELLERS AS WELL. CONE MADE OF NON-CORROSIVE ALUMINUM WITH A SPECIAL HARD COATING. HAS A BUILT-IN ISOLATOR TO FIGHT ELECTROLYSIS. 18-8 STAINLESS STEEL LOCK AND BRASS NUT. COMES WITH TOOLED KEY AND REGISTRATION CARD.

propcopb.gif (10010 bytes)

1. PART NUMBER 01 EVINRUDE & JOHNSON OUTBOARDS: 150 HP TO 3.6 AND 1985 120 TO 140 KING COBRA AND OMC 2.5 LITER OUT DRIVE 3/4” THREADED THROUGH THE HUB EXHAUST STANDARD PROPELLER, AND TURBO RAKER II.
2. PART NUMBER 01A EVINRUDE & JOHNSON HOLE SHOT
3. PART NUMBER 02 SAME POWER AS ABOVE, 3/4” THREAD THROUGH THE HUB EXHAUST, PERFORMANCE TYPE PROPELLER, CLEAVER AND LASER STYLE.
4. PART NUMBER 03 SAME AS ABOVE 3/4” THREAD OVER THE HUB EXHAUST CHOPPER STYLE WITH BUILT-IN SPLINE WASHER TYPE PROPELLER-WITH LOCK TABS. (MERCURY STYLE USE M3, COTTER PIN STYLE USE 03.)
5. PART NUMBER 04 EVINRUDE & JOHNSON: 60 TO 140 HP, EXCEPT 1985 110 TO 140HP (WITH LARGE GEAR CASE) STANDARD PROPELLER THROUGH THE HUB EXHAUST 5/8” THREAD (ALSO COBRA)
6. PART NUMBER M1 MARINER & MERCURY OUTBOARDS: 75HP TO 3.4 LITER, MERCRUISER 120 TO 260 HP AND 330 TO 370 TRS DRIVES WITH LOCK TABS, 3/4” THREAD, THROUGH THE HUB EXHAUST, STANDARD PROPELLER.
7. PART NUMBER M2 SAME POWER AS ABOVE, 3/4” THREAD WITH LOCK TAB, THROUGH THE HUB EXHAUST PERFORMANCE PROPELLER. CLEAVER, LASER AND MIRAGE STYLE.
8. PART NUMBER M3 SAME POWER AS ABOVE, 3/4” THREAD WITH BUILT-IN SPLINE WASHER LOCK TABS. OVER THE HUB EXHAUST, PERFORMANCE PROPELLER, CLEAVER AND CHOPPER STYLE. ALSO TURBO PROTESTOR AND PREDATOR PROPELLER. (RECESSED HUB, SEE BELOW)
9. PART NUMBER Y1 YAMAHA OUTBOARD: 115HP TO V6 18MM THREAD, STANDARD PROPELLER THROUGH THE HUB EXHAUST. ALSO SUZUKI 75 TO 200 HP STANDARD PROPELLER.
10. PART NUMBER Y2 SAME POWER AS ABOVE 18MM THREAD, PERFORMANCE PROPELLER, OVER THE HUB EXHAUST USING CHOPPER OR CLEAVER STYLE, 3 OR 4 BLADED PROTESTOR, PREDATOR OR TURBO PROPELLER WITH BUILT-IN SPLINE WASHER AND LOCK TABS, MERCURY STYLE.
11. PART NUMBER Y3 YAMAHA OUTBOARD: 50 TO 90 HP, 16MM THREAD, STANDARD PROPELLER THROUGH THE HUB EXHAUST.
12. PART NUMBER F1 FORCE OUTBOARDS: 65 TO 125HP, 5/8” THREAD.
13. PART NUMBER F2 FORCE OUTBOARDS: 150HP, 3/4” THREAD.
14. PART NUMBER F3 FORCE OUTBOARDS: MERCURY STYLE LOCK TABS. SEE M1 AND M2.

*NOTE: ALL 3/4” THREAD, WITH SOLID HUB AND FLAT WASHER ARE AVAILABLE ON SPECIAL ORDER. ALL 3/4” THREAD RECESSED HUB THROUGH THE HUB EXHAUST CAN USE 02 OR M2.

THE PROPATECTOR
OUR ECONOMY MODEL THEFT DETERRENT RETAINS MANY OF THE QUALITY FEATURES OF THE PROP COP. ALUMINUM ADAPTER IS ANODIZED TO INHIBIT CORROSION.   LIKE THE PROP COP, IT CAN BE USED ON COUNTER ROTATING PROPELLERS AND CAN BE KEYED ALIKE FOR TWIN ENGINES.

1. PART NUMBER MPT1 FITS: MARINER & MERCURY 3/4” THREAD, 75 HP TO 3.4 LITER OUTBOARDS; MERCRUISER 120 TO 260 HP AND 330 TO 370 TRS STANDARD PROP.
2. PART NUMBER OPT1 FITS: EVINRUDE & JOHNSON OUTBOARDS 150 HP TO 3.6 LITER; 3/4” THREAD COBRA (WITH LARGE LOWER GEAR CASE) AND KING COBRA.   STANDARD PROPELLER.
3. PART NUMBER OPT2 FITS: EVINRUDE & JOHNSON OUTBOARDS; 60 TO 140 HP, EXPECT 1985 110 TO 140 HP (WITH LARGE GEAR CASE) STANDARD PROP THRU THE HUB EXHAUST, 5/8” THREAD (ALSO COBRA) STANDARD PROPELLER.
4. PART NUMBER FPT1 FITS: FORCE OUTBOARDS; 65 TO 125 HP, 5’8” THREAD. STANDARD PROPELLER.
5. PART NUMBER FPT2 FITS: FORCE OUTBOARDS; 150HP, 3/4” THREAD. STANDARD PROPELLER.
6. PART NUMBER FPT3 FITS: FORCE OUTBOARDS; MERCURY STYLE LOCK TABS.   STANDARD PROPELLER.
7. PART NUMBER YPT1 FITS: YAMAHA OUTBOARDS; 115 HP TO V-6 18MM THREAD, STANDARD PROPELLER THROUGH THE HUB EXHAUST. ALSO SUZUKI 75 TO 200 HP STANDARD PROPELLER.

ocnprob.gif (21736 bytes)

OUTBOARD LOK ADAPTER
HAVE AROUND THE CLOCK SECURITY AT ALL TIMES WITH THE OUTBOARD LOCK ADAPTER. IT PROHIBITS ACCESS TO THE H EX HEAD SO IT CAN’T BE TURNED. FITS MOST OUTBOARDS. ADAPTER AND LOCKING BAR CRAFTED OF 18-8 STAINLESS STEEL. LOCKING NUT IS HEAT-TREATED STAINLESS. COMES WITH CODED KEY AND REGISTRATION CARD.

PART NUMBER

OBCL1 (FITS: 1/2” COARSE THREAD)
OBCL2 (FITS: 3/8” COARSE THREAD)

strngrd.gif (22771 bytes)

STERN GUARD
OUR TOP OF THE LINE HIGH-SECURITY INTERNAL LOCKING SYSTEM. CAN BE USED IN WATER, DURING STORAGE OR TRANSIT. THE ADAPTER HOUSING IS CRAFTED FROM NON-CORROSIVE STAINLESS STEEL. THE NUT MADE OF STAINLESS STEEL, WITH O-RINGS, FRONT AND REAR, WILL ASSURE A WATER TIGHT SEAL. THE SYSTEM COMES WITH A SPECIAL KEY AS UNIQUE AS THE COMBINATION OF A BANK VAULT, WITH OVER THREE MILLION COMBINATIONS. CAN BE KEYED ALIKE FOR TWIN INSTALLATIONS.

PART NUMBER

SSSW (FITS: 120 TO 260 HP MERCRUISER ALSO ALPHA DRIVES)
TSSW (FITS: 330 TO 370 HP TRS DRIVES)
BSSW (FITS: BRAVO I DRIVES AND 1991 ALPHA)

camloka.gif (19097 bytes)

CAM LOCKS
OUR SUPERIOR STERN DRIVE LOCKING SYSTEM ENABLES YOU TO LOCK UPPER AND LOWER OUT DRIVE UNITS. CAN BE USED IN WATER, DURING STORAGE, OR TRANSIT. DUE TO ITS DESIGN IT IS A SUPERIOR THEFT DETERRENT AND IS THE FINEST AVAILABLE ON THE MARKET TODAY. THE LOCKING NUT IS HEAT TREATED STAINLESS STEEL AND THE UNIT TAKES ONLY MINUTES TO INSTALL. KEYED ALIKE FOR TWIN INSTALLATIONS.

1. PART NUMBER CLU FITS: UPPER UNIT, 120 TO 260 HP MERCRUISER AND ALPHA.
2. PART NUMBER CLUC FITS: UPPER UNIT FOR COBRA ONLY
3. PART NUMBER CLL FITS: LOWER UNIT FOR MERCRUISER AND ALPHA DRIVES, 120 TO 260 HP
4. PART NUMBER CLUL FITS:UPPER AND LOWER UNITS FOR MERCRUISER 120 TO 260 HP
5. PART NUMBER CLUY FITS: UPPER UNIT FOR YAMAHA ONLY.

E-Mail Henry H. Smith Place an Order Back to Index

Henry H. Smith & Company***800-338-8900***(fax) 810-794-1120