MISCELLANEOUS PROPELLER TOOLING
MISCELLANEOUS PROPELLER TOOLING
| PART NUMBER |
|
107 90090 REPLACEMENT BLADE 107 90031 |
| BEARING
CARRIER PULLER REMOVES ALL MERCURY AND MERCRUISER PROP SHAFT BEARING CARRIERS WITH LATE STYLE TANGS CAST INTO THE CARRIER. |
| PROP AND BEARING CARRIER PULLER: For Mercruiser, all styles of bearing carriers, and most props. Has a 5 ton minimum capacity. | |
| Part Number: 107 90095 | OEM: N/A |
| OIL/FUEL
FILTER WRENCH THIS HANDY WRENCH REMOVES SCREW-ON TYPE MARINE WATER SEPARATOR FUEL FILTERS AND STANDARD SCREW-ON OIL FILTERS. FITS MOST STANDARD SIZES. TOUGH - FORGED STAINLESS STEEL. |
| PART NUMBER |
| 102 01117 |
| DRIVEN GEAR SHIMMING TOOL: Measures upper driven gear clearance on MC-I, R-MR, and Alpha One; and Alpha One, Gen Two drive units. | |
| Part Number: 107 90180 | OEM: 91 60526T |
| PINION NUT ADAPTER KIT: Holds pinion nut when removing pinion gear and drive shaft on MC-I, R-MR, and Alpha One drive units. Comes with one GLM 107 90220 drive shaft adapter. | |
| Part Number: 107 90210 | OEM: 91 61067A3 |
| BEARING CARRIER RETAINER WRENCH: Removes and installs bearing carrier retainer nuts on Bravo One and Two, MC-I, R-MR, and Alpha One, Gen. Two, and TRS drive units. | |
| Part Number: 107 90190 | OEM: 91 61069T |
| HINGE PIN TOOL: Removes and installs hinge pins from all Mercruiser drive units. | |
| Part Number: 107 90200 | OEM: 91 78310 |
| ENGINE ALIGNMENT TOOL: Aligns engine and drive unit during installation. | |
| Part Number: 107 90050 | OEM: 91 57797A3 |
| PROP SHAFT ADAPTER: Provides a wrench surface to turn the propeller shaft on MC-I, R-MR, Alpha One; Alpha One, Gen. Two, Bravo One, and TRS drive units. | |
| Part Number: 107 90230 | OEM: 91 61077 |
| SHIFT CABLE TOOL: Installs and removes shift cables on MC-I, R-MR, Alpha One; and Alpha One, Gen. Two drive units. | |
| Part Number: 107 90110 | OEM: 91 12037 |
| BEARING RETAINER WRENCH: Installs and removes drive shaft bearing retainer on MC-I, R-MR, Blackhawk, all Bravo, and all Alpha drive units. | |
| Part Number: 107 90100 | OEM: 91 17256 |
| SHIFT SHAFT BUSHING TOOL: Removes and installs the shift shat bushing in the gear case of MC-I, R-MR, and Alpha One drive units. | |
| Part Number: 107 90140 | OEM: 91 31107T |
| PINION GEAR SHIMMING TOOL: Measures pinion height of MC-I, R-MR, Alpha One, and Alpha One Gen.Two drive units. | |
| Part Number: 107 90160 | OEM: 91 56048T |
| DRIVE SHAFT ADAPTER: Provides a wrench surface to turn the drive shaft on MC-I, R-MR, Alpha One, and Alpha One Gen. Two drive units. | |
| Part Number: 107 90220 | OEM: 91 56775T |
| DRIVE GEAR SHIMMING TOOL: Measures upper drive gear clearance on MC-I, R-MR, Alpha One, and Alpha One Gen. Two drive units. | |
| Part Number: 107 90170 | OEM: 91 60523 |
E-Mail Henry H. Smith
Place an Order
Back to Index
02/26/07