Outboard And Sterndrive Propeller Tooling

OUTBOARD AND STERNDRIVE PROPELLER TOOLING
floatingpropwrench.gif (15101 bytes)

WRENCHES
QUICKSILVER FLOATING PROP WRENCH Propeller replacement just got easier with the new floating prop wrenches. Each color wrench fits a range of prop sizes. Lightweight, durable, and stows easy for an emergency prop change- and they float!
PART NUMBER	COLOR	ENGINE	HP
104 859046Q1	Purple	Mercury/Mariner	6,8,9.9,15

104 859046Q2	Green	Mercury/Mariner	20,25
		Johnson/Evinrude	9.9,15,20,30

104 859046Q3	Orange	Mercury/Mariner	30,40,50,60

104 859046Q4	Yellow	Mercury/Mariner	75,90,100,115,125,135,150,175,200,225,250
		Jonson/Evinrude	V4 Outboards(4" gear case):45,50,55,60,65,70,75,85,88,90,100,112,115,120,125,135,140
		Jonson/Evinrude	V6&V8 Outboards(4" gear case):150,175,185,200,225,235,2.6L,250,275,300,3.6L
		Cobra/Volvo SX	All
		Yamaha Outboards	T50,60,70,75,80,85,90,115,130,150,175,200,225,250
		Yamaha Sterndrives	All
		Nissan/Tohatsu	70,90,115,120,140
		Suzuki	DF60,70,DT75,85,90,100,115,140,150,175,200,225
		Honda	75,90,115,130

bravoblackpropwrench.gif (21228 bytes)

PROP PAL
ALLOWS REMOVAL OF PROPELLER TAB WASHER QUICKLY AND EASILY FOR ALL MERCRUISER OUT DRIVES ***LIMITED QUANTITY

PART NUMBER

138 PAL

quickpropliers.gif (12232 bytes)

QUICKSILVER PROP PLIERS
UNLOCKS PROPELLER TAB WASHER, MERC 70 (3 CYL)/MARINER 75 (3 CYL) AND UP AND MCM 2.5 LITER (120) TO 454 MAGNUM AND ALL TR. MODELS.
* NOT DESIGNED FOR USE ON ENGINES WITH V-6 CHOPPER, SPORT CHOPPER OR CLEAVER PROPELLERS.

PART NUMBER

104 38277

propal.gif (9854 bytes)

BRAVO III AND BLACK HAWK PROP WRENCH

PART NUMBER

104 805457

TOOL KITS

VOLVO PENTA PROPELLER REMOVAL TOOL KIT
TOOL KIT FOR DUO-PROP SERIES A-B-C
INSTALL THE PROPELLER AS FOLLOWS:
FRONT PROPELLER:
(1) LINE CUTTER (2) PROPELLER (3) NUT-TIGHTEN NUT USING THE TOOL SUPPLIED WITH A TORQUE OF 70-80NM.
REAR PROPELLER:
(4) LINE CUTTER (5) PROPELLER (6) PLASTIC WASHER
(7) PROPELLER CONE - TIGHTEN THE PROPELLER CONE HARD (8) WASHER
(9) LOCK SCREW TIGHTEN THE SCREW IN THE PROPELLER SHAFT TO A TORQUE OF 70-80 NM.

PART NUMBER

133 058

TOOL KIT FOR DUO-PROP SERIES D-F
INSTALL THE PROPELLER AS FOLLOWS:
(1) APPLY A LIGHT COATING TO THE PROPELLER SHAFT SPLINES USING VOLVO PENTA PROPELLER SHAFT GREASE
(2) PLACE THE SHIFT CONTROL IN THE FORWARD POSITION TO LOCK THE PROPELLER SHAFT
(3) INSTALL THE FORWARD PROPELLER
(4) INSTALL THE FORWARD PROPELLER NUT AND TIGHTEN TO APPROX. 45 FT. LBS.
(5) PLACE THE SHIFT CONTROL IN THE REVERSE POSITION TO LOCK THE PROPELLER SHAFT
(6) INSTALL THE REAR PROPELLER NUT AND TIGHTEN TO 50 FT. LBS.

PART NUMBER

133 516

TOOL KIT FOR DUO-PROP SERIES E
SAFE-WAY PROPELLER PULLERS
MADE OF STEEL FORGINGS AND CASTINGS FOR MAXIMUM STRENGTH AND TOUGHNESS ZINC OR CADMIUM PLATED BOLTS, STUDS, NUTS AND WASHERS FOR MAXIMUM CORROSION RESISTANCE COMBINATION PULLERS REMOVE 2, 3, 4 AND 5 BLADE PROPELLERS. FOUR SIZES TO SUIT EVERY POPULAR 2-5 BLADE PROPELLER. REMOVE TIGHT PROPELLERS SAFELY AND EASILY.

PART NUMBER

133 195

combinepuller.gif (21494 bytes)

COMBINATION PULLER
PROPELLER PULLER AND BEARING CARRIER PULLER

PART NUMBER

107 90090

E-Mail Henry H. Smith Place an Order Back to Index

Henry H. Smith & Company***800-338-8900***(fax) 810-794-1120

02/26/07