logo-hhs.gif (15551 bytes)                     hhs-turbologo.jpg (13409 bytes)

FORCE OUTBOARD PROPELLERS

TURBO 1

wpe4.jpg (37419 bytes)
The TURBO 1 utilizes a blade geometry designed to achieve excellent overall performance on medium to heavily loaded boats that require the prop to lift the bow of the boat.   TURBO 1 is available in a wide variety of pitches, making it an excellent choice for most stern drive and V-6 outboard applications.  Available in right and left hand rotations in limited sizes.
13-1/4” SMALL HUB
 
For Force Outboards 75 - 150 HP (after 1994)
PITCHES: 13A - 15A - 17A - 19A - 21A - 23A - 24A - 25A

 

TURBO FLATS IV

wpeA.jpg (26331 bytes)
The TURBO FLATS IV uses an aggressive, full blade design in a four blade configuration to give your flats or bay boat fast acceleration and stable performance in rough water conditions.  The FLATS IV was designed exclusively for the intermediate sized gear cases and allows optimum bow lift and load carrying capacity at higher engine heights.
13-1/4” DIA.
 
For Force Outboards 75 - 150 HP (after 1994)
PITCHES: 13 - 15 - 17 - 19 - 21

 letter.gif (1027 bytes)                                        order2.gif (1452 bytes)                                        door.jpg (810 bytes)
 E-Mail Henry H. Smith                          Place an Order                                     Back to Index

Henry H. Smith & Company***800-338-8900***(fax) 810-794-1120

02/26/07