MERCURY & MARINER OUTBOARD PROPELLERS
TURBO 1 |
|
| The TURBO 1 utilizes a blade geometry designed to achieve excellent overall performance on medium to heavily loaded boats that require the prop to lift the bow of the boat. TURBO 1 is available in a wide variety of pitches, making it an excellent choice for most stern drive and V-6 outboard applications. Available in right and left hand rotations in limited sizes. | |
| 13-1/4”
SMALL HUB |
|
| For Mercury & Mariner outboards 75-150 HP (Intermediate Gear Case) | |
| PITCHES: 13A - 15A - 17A - 19A - 21A - 23A - 24A - 25A | |
| 14-1/4” LARGE HUB |
|
| For Mercury & Mariner V-6 Outboards | |
| PITCHES: 13A - 15A - 17A - 19A - 20A - 21A - 22A - 23A - 24A - 25A - 27A |
TURBO LIGHTNING |
|
| The TURBO LIGHTNING was born out of the quest for speed. The LIGHTNING targets the V6 and V8 outboard markets with a responsive and enhanced top end performance. The aggressive pitch, high rake and large diameter blade design all work to give this prop excellent performance at increased engine and drive heights. | |
| 14-3/4”
DIA. |
|
| For Mercury V6 and V8 outboards | |
| PITCHES: 23 - 24 - 25 - 26 - 27 |
TURBO HOT SHOT |
|
| The TURBO HOT SHOT is the little brother of the TURBO family. It was developed for the smaller outboards in the 18 to 70 HP range. The HOT SHOT design follows the same total performance geometry of the larger 3 blade TURBO props. The acceleration, speed and fuel efficiency is unsurpassed in the industry. | |
| 10-1/8”
DIA. |
|
| For Mercury & Mariner 18 - 25 HP | |
| PITCHES: 10 - 11 - 12 - 13 - 14 - 15 | |
| 10-1/2”
DIA. |
|
| For Mercury & Mariner 40 - 70 HP | |
| PITCHES: 12 - 13 - 14 - 15 - 16 - 17 |
TURBO 2 + 2 |
|
| The TURBO 2 + 2 FOUR BLADE line all share tremendous hole shot, impressive mid-range acceleration, and a fast stable top end speed. These Turbo props achieve an overall boat lift with a high concentration of bow lift. |
|
| The TURBO 2 + 2 OT is the choice of serious fishermen and uses an over and thru hub exhaust for V-6 outboards. | |
|
TURBO 2 + 2 OT 13-3/4”
DIA. |
|
| For Mercury & Mariner V6 outboards | |
| PITCHES: 18 - 20 - 22 - 23 - 24 - 25 - 26 | |
| The TURBO 2 + 2 X has the same qualities as the Turbo 2 + 2 OT but is designed specifically for the small gear cases of the Mercury XR-4 and XR-6 as well as the Mariner Magnum II and Magnum III outboards. | |
|
TURBO 2 + 2 X 13-1/4”
DIA. |
|
| For Mercury XR4 & XR6 & Mariner Magnum II & III & Intermediate outboards | |
| PITCHES: 18 - 20 - 22 - 23 - 24 - 25 | |
| The TURBO 2 + 2 TH uses a thru hub exhaust design and is a true performer on sterndrive boats with large horsepower. This prop also performs on larger boats with V-6 outboards. It is preferred by skiers and family boaters. | |
|
TURBO 2 + 2 TH 14-1/4”
DIA. |
|
| Mercury & Mariner V6 outboards | |
| PITCHES: 16 - 18 - 20 - 22 - 24 - 25 - 26 | |
TURBO FLATS IV |
|
| The TURBO FLATS IV uses an aggressive, full blade design in a four blade configuration to give your flats or bay boat fast acceleration and stable performance in rough water conditions. The FLATS IV was designed exclusively for the intermediate sized gear cases and allows optimum bow lift and load carrying capacity at higher engine heights. | |
| 13-1/4”
DIA. |
|
| For Mercury & Mariner outboards 75 - 150 HP (Intermediate gear case) | |
| PITCHES: 13 - 15 - 17 - 19 - 21 |
TURBO ULTIMA 4 |
|
| The TURBO ULTIMA 4 develops overall lift and stability for the offshore fishing market. Rough water and adverse conditions are no match for the ULTIMA 4 Series. The ULTIMA 4 will carry the load in the long haul, offer great acceleration and improved mid-range performance. The ULTIMA 4s are available in right and left rotation. | |
| 14-1/4”
DIA. |
|
| For Mercury & Mariner V-6 outboards | |
| PITCHES: 15 - 17 - 19 - 21 - 23 - 25 |
E-Mail Henry H. Smith
Place an Order
Back to Index
02/26/07
