Turbo Nissan Propellers

TURBO 1
The TURBO 1 utilizes a blade geometry designed to achieve excellent overall performance on medium to heavily loaded boats that require the prop to lift the bow of the boat. TURBO 1 is available in a wide variety of pitches, making it an excellent choice for most stern drive and V-6 outboard applications. Available in right and left hand rotations in limited sizes.
13-1/4” SMALL HUB
For Nissan Outboards 90 - 140 HP
PITCHES: 13A - 15A - 17A - 19A - 21A - 23A - 24A - 25A

TURBO HOT SHOT
The TURBO HOT SHOT is the little brother of the TURBO family. It was developed for the smaller outboards in the 18 to 70 HP range. The HOT SHOT design follows the same total performance geometry of the larger 3 blade TURBO props. The acceleration, speed and fuel efficiency is unsurpassed in the industry.
10-1/8” DIA.
For Nissan 25 - 30 HP • Tohatsu 25 - 30 HP
PITCHES: 10 - 11 - 12 - 13 - 14 - 15
10-1/2” DIA.
For Nissan 40 - 70 HP • Tohatsu 40 - 70 HP
PITCHES: 12 - 13 - 14 - 15 - 16 - 17

TURBO FLATS IV
The TURBO FLATS IV uses an aggressive, full blade design in a four blade configuration to give your flats or bay boat fast acceleration and stable performance in rough water conditions. The FLATS IV was designed exclusively for the intermediate sized gear cases and allows optimum bow lift and load carrying capacity at higher engine heights.
13-1/4” DIA.
For Nissan Outboards 90 - 140 HP
PITCHES: 13 - 15 - 17 - 19 - 21