OMC STERN DRIVE PROPELLERS
TURBO 1 |
|
| The TURBO 1 utilizes a blade geometry designed to achieve excellent overall performance on medium to heavily loaded boats that require the prop to lift the bow of the boat. TURBO 1 is available in a wide variety of pitches, making it an excellent choice for most stern drive and V-6 outboard applications. Available in right and left hand rotations in limited sizes. | |
| 13-1/4”
SMALL HUB |
|
| For 400 Series & Cobra Stern Drives - 1.6 Litre OMC Sea Drives | |
| PITCHES: 13A - 15A - 17A - 19A - 21A - 23A - 24A - 25A | |
| 14-1/4” LARGE HUB |
|
| For OMC 800 Series & Cobra Stern Drives - 2.5 / 2.6 Litre OMC Sea Drives | |
| PITCHES: 13A - 15A - 17A - 19A - 20A - 21A - 22A - 23A - 24A - 25A - 27A |
TURBO LIGHTNING |
|
| The TURBO LIGHTNING was born out of the quest for speed. The LIGHTNING targets the V6 and V8 outboard markets with a responsive and enhanced top end performance. The aggressive pitch, high rake and large diameter blade design all work to give this prop excellent performance at increased engine and drive heights. | |
| 14-3/4” DIA. |
|
| For OMC V6 and V8 outboards | |
| PITCHES: 23 - 24 - 25 - 26 - 27 |
TURBO 2 + 2 |
|
| The TURBO 2 + 2 FOUR BLADE line all share tremendous hole shot, impressive mid-range acceleration, and a fast stable top end speed. These Turbo props achieve an overall boat lift with a high concentration of bow lift. | |
| The TURBO 2 + 2 TH uses a thru hub exhaust design and is a true performer on sterndrive boats with large horsepower. This prop also performs on larger boats with V-6 outboards. It is preferred by skiers and family boaters. | |
|
TURBO 2 + 2 TH 14-1/4”
DIA. |
|
| For OMC Series 800 - 2.5 / 2.6 Litre Sea Drives | |
| PITCHES: 16 - 18 - 20 - 22 - 24 - 25 - 26 |
TURBO FLATS IV |
|
| The TURBO FLATS IV uses an aggressive, full blade design in a four blade configuration to give your flats or bay boat fast acceleration and stable performance in rough water conditions. The FLATS IV was designed exclusively for the intermediate sized gear cases and allows optimum bow lift and load carrying capacity at higher engine heights. | |
| 13-1/4” DIA. |
|
| For 400 Series & Cobra Stern Drive - 1.6 Litre Sea Drives | |
| PITCHES: 13 - 15 - 17 - 19 - 21 |
TURBO ULTIMA 4 |
|
| The TURBO ULTIMA 4 develops overall lift and stability for the offshore fishing market. Rough water and adverse conditions are no match for the ULTIMA 4 Series. The ULTIMA 4 will carry the load in the long haul, offer great acceleration and improved mid-range performance. The ULTIMA 4s are available in right and left rotation. | |
| 14-1/4” DIA. |
|
| For OMC 800 Series & Cobra Stern Drives - 2.5/2.6 Litre OMC Sea Drives | |
| PITCHES: 15 - 17 - 19 - 21 - 23 - 25 |
E-Mail Henry H. Smith
Place an Order
Back to Index
02/26/07
