logo-hhs.gif (15551 bytes)                          turbologo.jpg (13409 bytes)

YAMAHA OUTBOARD PROPELLERS

TURBO HOT SHOT

wpe8.jpg (41389 bytes)

The TURBO HOT SHOT is the little brother of the TURBO family.  It was developed for the smaller outboards in the 18 to 70 HP range.  The HOT SHOT design follows the same total performance geometry of the larger 3 blade TURBO props.  The acceleration, speed and fuel efficiency is unsurpassed in the industry.
10-1/8” DIA.
 
For Yamaha 20 - 30 HP
PITCHES: 10 - 11 - 12 - 13 - 14 - 15
10-1/2” DIA.
 
For Yamaha 40 - 60 HP
PITCHES: 12 - 13 - 14 - 15 - 16 - 17

 

TURBO 1

wpe4.jpg (37419 bytes)

The TURBO 1 utilizes a blade geometry designed to achieve excellent overall performance on medium to heavily loaded boats that require the prop to lift the bow of the boat.   TURBO 1 is available in a wide variety of pitches, making it an excellent choice for most stern drive and V-6 outboard applications.  Available in right and left hand rotations in limited sizes.
13-1/4” SMALL HUB
 
For Yamaha Outboards 70 - 130 HP
PITCHES: 13A - 15A - 17A - 19A - 21A - 23A - 24A - 25A
14-1/4” LARGE HUB
 
For Yamaha V6 Outboards & Yamaha Stern Drives
PITCHES:  13A - 15A - 17A - 19A - 20A - 21A - 22A - 23A - 24A - 25A - 27A

 

TURBO LIGHTNING

wpe7.jpg (21655 bytes)

The TURBO LIGHTNING was born out of the quest for speed.  The LIGHTNING targets the V6 and V8 outboard markets with a responsive and enhanced top end performance.  The aggressive pitch, high rake and large diameter blade design all work to give this prop excellent performance at increased engine and drive heights.
14-3/4” DIA.
 
For Yamaha V6 and V8 outboards
PITCHES: 23 - 24 - 25 - 26 - 27

 

TURBO FLATS IV

wpeA.jpg (26331 bytes)

The TURBO FLATS IV uses an aggressive, full blade design in a four blade configuration to give your flats or bay boat fast acceleration and stable performance in rough water conditions.  The FLATS IV was designed exclusively for the intermediate sized gear cases and allows optimum bow lift and load carrying capacity at higher engine heights.
13-1/4” DIA.
 
For Yamaha Outboards 70 - 130 HP
PITCHES: 13 - 15 - 17 - 19 - 21

 

TURBO 2 + 2

wpe9.jpg (50961 bytes)

The TURBO 2 + 2 FOUR BLADE line all share tremendous hole shot, impressive mid-range acceleration, and a fast stable top end speed.  These Turbo props achieve an overall boat lift with a high concentration of bow lift.
The TURBO 2 + 2 OT is the choice of serious fishermen and uses an over and thru hub exhaust for V-6 outboards.
TURBO 2 + 2 OT    13-3/4” DIA.
 
For Yamaha V6 outboards
PITCHES: 18 - 20 - 22 - 23 - 24 - 25 - 26
The TURBO 2 + 2 X has the same qualities as the Turbo 2 + 2 OT but is designed specifically for the small gear cases.
TURBO 2 + 2 X    13-1/4” DIA.
 
For Yamaha Outboards 70 - 140 HP
PITCHES: 18 - 20 - 22 - 23 - 24 - 25

 

TURBO ULTIMA 4

wpeB.jpg (40190 bytes)

The TURBO ULTIMA 4 develops overall lift and stability for the offshore fishing market.  Rough water and adverse conditions are no match for the ULTIMA 4 Series.  The ULTIMA 4 will carry the load in the long haul, offer great acceleration and improved mid-range performance.   The ULTIMA 4s are available in right and left rotation.
14-1/4” DIA.
 
For Yamaha V-6 outboards
PITCHES: 15 - 17 - 19 - 21 - 23 - 25

 letter.gif (1027 bytes)                                         order2.gif (1452 bytes)                                        door.jpg (810 bytes)
 E-Mail Henry H. Smith                          Place an Order                                     Back to Index

Henry H. Smith & Company***800-338-8900***(fax) 810-794-1120

02/26/07